Bathtub Resurfacing
Does your bathtub need a makeover? Replacing the bathtub is not in your budget? Resurfacing in a option we offer
Bathtub Resurface, Reglaze, Recoating, Refisnishing
There’s nothing quite like a relaxing bubble bath at the end of a long hard day. But in order to enjoy some TLC in your bathtub, you need a clean space you actually want to sink into. Rust, grime and cracks can quickly turn your relaxing oasis into a gross nightmare, but many of us put off bathtub renovation projects because, well, they’re kind of overwhelming. Whether you’re dealing with minor rust spots or a major mess, the bathtub resurfacing option can fit your budget, timeline and lifestyle.
What is it?
This bathtub renovation option goes by many names of resurfacing, recoating, refinishing or reglazing, but has a pretty straightforward process. Our expert starts by sanding down the tub’s surface, fills in cracks and worn areas, then applies several coats of primer and paint before doing a final buffing.
Will it work for your tub?
If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. Acrylic bathtubs can also be reglazed, as long as they don’t have any significant issues.
Care & Maintenance (Bath Tub, Sink and Tile)
- The surface must remain dry for 24 hrs after work has been completed.
- Take care removing any masking tape and paper after 24 hrs.
- Reinstall any hardware such as drains, faucets, handles, etc. after 24 hrs.
- You must never use bath mats with suction cups! Any suction cups can damage the finish.
- When cleaning, use only a non-abrasive cleaner. Remove cleaner thoroughly after use. Do not use cleaners with bleach.
- Do not store soaps, shampoo, bath oil, shaving cream, etc on bathtub or rim. Chemicals in these products can damage the finish over time.
- Repair any leaky faucets at once. Dripping water will cause premature wear and rust around drain.
- Take care pouring any liquid drain opener directly into drain, making sure not to spill any on the finished surface.
- Most surface dust will dissipate in 3-4 weeks with normal cleaning and usage. Do not pick surface dust off with finger.
Follow these rules and your surface will look great for years to come!
Common Bathtub Resurfacing Questions
When considering the cost of replacement, you must also consider the costs of the removal, replacement items, labor and installation – not to mention the mess and time bathroom remodeling typically takes. Refinishing increases the value of your home and with more than 80% savings over replacement, refinishing is an ideal solution.
With the proper care, you can expect around a decade for bathtubs and enclosures. Wall tile can last even longer because it receives far less wear. Also bathtubs can be refinished over and over again.
Work is completed the same day. Be wary of any company claiming a standard tub or something larger can be completed properly in “1 or 2 hours”. We define time frame as the moment we arrive to the moment we drive off. If a single bathtub refinisher is using the standard industry technology, and not cutting corners, it will take longer than 1 or 2 hours from the time they arrive to the time the leave.
Light usage after 24 hours for bathtubs and enclosures. Floor tile and countertops can be used 72 hours after the last coat is applied. Warranty is voided if refinished area is used or disturbed prior to this recommended cure time.
Yes. Any leaking faucets and loose tile or grout should be repaired before we can refinish. Additionally, the tub’s water source and drain must be in working order. You should remove any soaps, shampoo, razors, toothbrushes, curtains, shower rods, hanging caddies, pictures, etc. from the area. Any item you can move with your finger should be removed. It is best if you can also remove shower doors and tracks before we arrive. If fixtures such as toilets, vanities, cabinets or pedestal sinks are in the way of refinishing the tile or tub, they should be removed prior to our arrival. It would be greatly appreciated, though not required, that you vacuum up the rooms and lightly clean them for sanitary purposes. A clean environment will also limit the amount of surface dust that will settle on the newly refinished surface.
No. Bathtub refinishing, bathtub reglazing, tile refinishing or tile reglazing are all describing the same process of applying a new finish over a hard surface. Do not confuse this with applying new porcelain. Porcelain can only be baked-on in a kiln (oven).
Our process is not harmful to people or pets. We mask odors with a fragrance and properly seal off and ventilate the areas we’re working in. There will be a lingering odor for the first 24hrs. Everyone has different sensitivity levels, so if you are still concerned it’s probably best you are absent during the actual spraying process.
- The surface must remain dry for 24 hrs after work has been completed.
- Take care removing any masking tape and paper after 24 hrs.
- Reinstall any hardware such as drains, faucets, handles, etc. after 24 hrs.
- You must never use bath mats with suction cups! Any suction cups can damage the finish.
- When cleaning, use only a non-abrasive cleaner. Remove cleaner thoroughly after use. Do not use cleaners with bleach.
- Do not store soaps, shampoo, bath oil, shaving cream, etc on bathtub or rim. Chemicals in these products can damage the finish over time.
- Repair any leaky faucets at once. Dripping water will cause premature wear and rust around drain.
- Take care pouring any liquid drain opener directly into drain, making sure not to spill any on the finished surface.
- Most surface dust will dissipate in 3-4 weeks with normal cleaning and usage. Do not pick surface dust off with finger.